1 / 20
A. A. True
B. B. False.
Try not to overdo the item or what you are checking it for. You only get 30 minutes to check everything on the vehicle.
2 / 20
A. B. No
B. A. Yes
Overviews give you a chance to catch major problems early.
3 / 20
A. C. Nothing, you do not have to check the lights
B. A. That they work
C. B. That the lens covers are there, lights are securely attached, clean, and working
All lights will need checked at the front, back and sides of the vehicle. They will need checked for covers, cleanliness, secureness, and that they work.
4 / 20
A. C. That it is clean, and not leaking
B. B. That the windshield is there, not cracked or chipped, clean, the seals are in good condition, and not leaking
C. A. That the windshield is there, not cracked or chipped
Mentioning the windshield and checking it for cracks, chips, and cleanliness is not enough. You will have to check the seals and for leaks to get it marked as checked.
5 / 20
A. A. The hinges, catches, and springs
B. B. The important stuff is under the hood, so nothing
C. D. Both A and C
D. C. For damage
The hood will always need checked, mainly for damage, but don't forget the hinges, catches, and springs or you might not get credit.
6 / 20
A. D. All the above
B. C. Clean
C. A. Properly mounted
D. B. No cracks
Don't forget you can have mirrors on the hood, and on the doors of the cab. While outside check for mounts, cracks, and cleanliness. You should also check them again when inside the vehicle to make sure they are properly adjusted.
7 / 20
A. B. Transmission fluid, oil, coolant, and power steering fluid
B. C. Moisture or leaks, oil, coolant, power steering fluid
C. D. None of these
D. A. Windshield wiper fluid, oil, coolant, and moisture or leaks
It is best to check all your fluids during a pre-trip inspection, but the fluids you have to say are oil, coolant, power steering, and checking for moisture and leaks.
8 / 20
A. D. Power steering pump, alternator, air compressor, and water pump
B. A. Power steering pump, fuel pump, alternator, water pump
C. C. Fuel pump, alternator, air compressor, water pump
D. B. Power steering pump, fuel pump, alternator, air compressor
It is best to check all your belt and gear driven components, but the power steering, alternator, air compressor, and water pump are all that appear on the CDL pre-trip.
9 / 20
A. D. All the above
B. A. Proper level
C. C. Not leaking
D. B. Clean of debris
All fluids should be at the proper level, clean, free of debris, with no leaks. You can also add proper color to this list. Some coolants are red, green and orange. Red or clear for most power steering. Oil can be difficult, it should be tan in color, but normally after use of the vehicle it gets black.
10 / 20
A. B. Upper steering linkage, universal joints, tie rod ends, tie rod
B. C. Upper steering linkage, universal joints, power steering pump, pitman arm, drag link, tie rod ends, tie rod
C. D. Upper steering linkage, universal joints, pitman arm, tie rod ends, tie rod
D. A. Upper steering linkage, gearbox, tie rod ends, and tie rod
The steering linkage consists of upper steering linkage, universal joints, power steering pump, pitman arm, drag link, tie rod ends, tie rod. They will all need checked separately.
11 / 20
A. C. No excessive play
B. B. Cotter pins in place
C. A. All castle nuts are tight and secure
D. D. All the above
Along with the castle nuts, cotter pins, and excessive play you can check for illegal welds and cracks.
12 / 20
A. C. Power steering fluid
B. D. Coolant level
C. A. Oil level
D. B. Oil pressure
Oil pressure is checked on the inside of the cab using the oil pressure gauge.
13 / 20
A. B. Water pump belt
B. A. Power steering belt
C. D Air compressor belt
D. C. Safety belt
The safety belt secures the driver in the cab.
14 / 20
A. B. The safety system
B. A. The coupling system
C. D. The hydraulic system
D. C. The suspension system
These are all components of the suspension system and will need checked independently in your pre-trip exam.
15 / 20
A. E. Both A and B
B. C. Welds
C. A. Cracks, frays, and tears
D. B. Connections tight and secure
E. F. A, B, and D.
F. D. Leaks
Make sure the lines are connected and secure, no frays, cracks, tears, and no leaks to get hoses marked off. The trick is you need to say horses for the air compressor, power steering, water pump independently to get credit.
16 / 20
A. C. Overheating
B. B. Cracks, frays, and tears
C. A. Excessive play
D. D. Both A and B
Check each belt individually. There can be belts for a few different components under the hood. The excessive play of more than 3/4 of an inch.
17 / 20
A. B. No frays, cracks, or damage
B. A. Connections tight and secure
C. D. All the above
D. C. No signs of leaks
As with all hoses, make sure the connections are tight and secure. That there are no frays, cracks, or damage to the lines with no leaks. With an airline leaks can be found by suspicious clean spots on the hose.
18 / 20
A. D. Only used in emergencies
B. C. Not on a commercial vehicle
C. A. Part of the braking system
D. B. Where air is stored for use
Also called brake chambers, they are found on most commercial vehicles, and filled with air to apply the brakes.
19 / 20
A. C. Not damaged
B. B. Not leaking
C. A. Tight and secure
D. D. All the above
Also called brake chambers, they need to be mounted tight and secure, not excessively damaged, and not leaking.
20 / 20
A. B. 1/2 of an inch
B. C. 3/4 of an inch
C. A. 1/4 of an inch
D. D. 1 inch
There should be no more than 1 inch of play in any slack adjuster on the vehicle, with the brakes off.