1 / 20
A. B. False.
B. A. True
Try not to overdo the item or what you are checking it for. You only get 30 minutes to check everything on the vehicle.
2 / 20
A. B. No
B. A. Yes
Overviews give you a chance to catch major problems early.
3 / 20
A. A. That they work
B. B. That the lens covers are there, lights are securely attached, clean, and working
C. C. Nothing, you do not have to check the lights
All lights will need checked at the front, back and sides of the vehicle. They will need checked for covers, cleanliness, secureness, and that they work.
4 / 20
A. B. That the windshield is there, not cracked or chipped, clean, the seals are in good condition, and not leaking
B. C. That it is clean, and not leaking
C. A. That the windshield is there, not cracked or chipped
Mentioning the windshield and checking it for cracks, chips, and cleanliness is not enough. You will have to check the seals and for leaks to get it marked as checked.
5 / 20
A. D. Both A and C
B. B. The important stuff is under the hood, so nothing
C. A. The hinges, catches, and springs
D. C. For damage
The hood will always need checked, mainly for damage, but don't forget the hinges, catches, and springs or you might not get credit.
6 / 20
A. C. Clean
B. B. No cracks
C. D. All the above
D. A. Properly mounted
Don't forget you can have mirrors on the hood, and on the doors of the cab. While outside check for mounts, cracks, and cleanliness. You should also check them again when inside the vehicle to make sure they are properly adjusted.
7 / 20
A. A. Windshield wiper fluid, oil, coolant, and moisture or leaks
B. B. Transmission fluid, oil, coolant, and power steering fluid
C. C. Moisture or leaks, oil, coolant, power steering fluid
D. D. None of these
It is best to check all your fluids during a pre-trip inspection, but the fluids you have to say are oil, coolant, power steering, and checking for moisture and leaks.
8 / 20
A. C. Fuel pump, alternator, air compressor, water pump
B. A. Power steering pump, fuel pump, alternator, water pump
C. D. Power steering pump, alternator, air compressor, and water pump
D. B. Power steering pump, fuel pump, alternator, air compressor
It is best to check all your belt and gear driven components, but the power steering, alternator, air compressor, and water pump are all that appear on the CDL pre-trip.
9 / 20
A. A. Proper level
B. C. Not leaking
C. D. All the above
D. B. Clean of debris
All fluids should be at the proper level, clean, free of debris, with no leaks. You can also add proper color to this list. Some coolants are red, green and orange. Red or clear for most power steering. Oil can be difficult, it should be tan in color, but normally after use of the vehicle it gets black.
10 / 20
A. A. Upper steering linkage, gearbox, tie rod ends, and tie rod
B. C. Upper steering linkage, universal joints, power steering pump, pitman arm, drag link, tie rod ends, tie rod
C. D. Upper steering linkage, universal joints, pitman arm, tie rod ends, tie rod
D. B. Upper steering linkage, universal joints, tie rod ends, tie rod
The steering linkage consists of upper steering linkage, universal joints, power steering pump, pitman arm, drag link, tie rod ends, tie rod. They will all need checked separately.
11 / 20
A. D. All the above
B. A. All castle nuts are tight and secure
C. C. No excessive play
D. B. Cotter pins in place
Along with the castle nuts, cotter pins, and excessive play you can check for illegal welds and cracks.
12 / 20
A. B. Oil pressure
B. C. Power steering fluid
C. D. Coolant level
D. A. Oil level
Oil pressure is checked on the inside of the cab using the oil pressure gauge.
13 / 20
A. B. Water pump belt
B. C. Safety belt
C. A. Power steering belt
D. D Air compressor belt
The safety belt secures the driver in the cab.
14 / 20
A. D. The hydraulic system
B. A. The coupling system
C. C. The suspension system
D. B. The safety system
These are all components of the suspension system and will need checked independently in your pre-trip exam.
15 / 20
A. E. Both A and B
B. F. A, B, and D.
C. A. Cracks, frays, and tears
D. D. Leaks
E. B. Connections tight and secure
F. C. Welds
Make sure the lines are connected and secure, no frays, cracks, tears, and no leaks to get hoses marked off. The trick is you need to say horses for the air compressor, power steering, water pump independently to get credit.
16 / 20
A. D. Both A and B
B. B. Cracks, frays, and tears
C. A. Excessive play
D. C. Overheating
Check each belt individually. There can be belts for a few different components under the hood. The excessive play of more than 3/4 of an inch.
17 / 20
A. D. All the above
B. B. No frays, cracks, or damage
C. A. Connections tight and secure
D. C. No signs of leaks
As with all hoses, make sure the connections are tight and secure. That there are no frays, cracks, or damage to the lines with no leaks. With an airline leaks can be found by suspicious clean spots on the hose.
18 / 20
A. B. Where air is stored for use
B. C. Not on a commercial vehicle
C. A. Part of the braking system
D. D. Only used in emergencies
Also called brake chambers, they are found on most commercial vehicles, and filled with air to apply the brakes.
19 / 20
A. A. Tight and secure
B. D. All the above
C. B. Not leaking
D. C. Not damaged
Also called brake chambers, they need to be mounted tight and secure, not excessively damaged, and not leaking.
20 / 20
A. D. 1 inch
B. B. 1/2 of an inch
C. A. 1/4 of an inch
D. C. 3/4 of an inch
There should be no more than 1 inch of play in any slack adjuster on the vehicle, with the brakes off.
1 / 20
Progress
0
Errors