DMV CDL Practice Test 2 - Pre Trip Inspection

1 / 20

After the engine compartment it is best to move to the driver's side of vehicle, and then head into the cab.

A. True

B. False

This is true. It is best to get to the inside cab early. If you do not make it to the inside can you can automatically fail for not doing the CDL air brakes test.

2 / 20

At the side of the cab you should not check.

A. None of these

B. Lights and reflectors

C. Fuel and air tanks.

D. Steps into the vehicle

E. Mirrors

All these items will all appear on your CDL pre-trip. The correct answer is none of these.

3 / 20

The fuel and air tanks are checked for the same items except?

A. Hoses

B. No leaks

C. Mounting brackets and bolts

D. The cap

Both the fuel and air tanks should be checked for proper mount, no leaks, and good hoses. Only the fuel tank will have a cap so you may fill the tanks.

4 / 20

Steps leading into the vehicle should be?

A. Properly mounted

B. Properly mounted, not damaged, and all bolts tight and secure

C. Properly mounted and not damaged

D. Strong enough to support twice your weight

Make sure the steps are properly mounted, no damage, and bolts are present and secure.

5 / 20

Handrails should be checked for?

A. Tight and secure

B. All the above

C. All bolts in place

D. Mounted

Handrails will need to be tight and secure, properly mounted, all bolts in place, and no excessive damage.

6 / 20

Is it best to check the seat and the seatbelts before sitting down?

A. Yes

B. No

We suggest checking the seat and belt for securement and damage before sitting down. You will be in a hurry, and it is best to mention them when you see them.

7 / 20

The first thing you should check or do when you sit in the driver's seat is?

A. Turn on your lights

B. Check the air horn

C. Start the vehicle

D. Buckle your seatbelt

As soon as you sit in the driver's seat please buckle your seatbelt. If you move the vehicle at all without your seatbelt fastened it is an automatic fail.

8 / 20

Check your mirrors from the inside of the cab for?

A. Mounts

B. Adjusted so that you can see

C. No cracks

D. Clean

If you checked them for mounts, cracks, and clean while outside of the vehicle there is no need to state those again. Adjustment can only be checked from the driver's seat, but if you forgot to mention the mirrors on the outside of the vehicle you can check them now for everything.

9 / 20

Items inside the cab you must make function in order to get credit for them are?

A. All answers are correct

B. Windshield wipers

C. Blower motors, temperature control, and diverter

D. Lights

E. Air and city horns

If you just mention the wipers and do not check to make sure they work you will not get credit for them. This is true with all the answers here.

10 / 20

The steering wheel should be checked for?

A. That it turns

B. None of the above

C. No play exceeding 2" or 10 degrees

D. No play

Steering wheels should not have more than 2" of play or 10 degrees in a 20" wheel.

11 / 20

Before you start the vehicle you should check?

A. All the above

B. Seat belt is fastened

C. Parking brake is set

D. The vehicle is in neutral

Making sure the vehicle is in neutral, parking brake set, and seat belt on is steps to a safe start of the vehicle. You should also apply the clutch if equipped before starting.

12 / 20

These are all gauges that will need checked except?

A. Voltmeter

B. Air pressure gauge

C. Water pressure gauge

D. None of these are correct

E. Oil pressure gauge

We do not check the water pressure gauge, instead you should check the water temperature gauge.

13 / 20

The air pressure in a commercial vehicle should rise to governor cutout of?

A. 120 PSI

B. 160 PSI

C. 150 PSI

D. 100 PSI

Air pressure should rise to between 120-140 PSI.

14 / 20

Which gauge should be between 12-14, and in the green?

A. Fuel

B. Water temperature

C. Air pressure

D. Voltmeter

The voltmeter should be between 12-14, and in the green to be working properly.

15 / 20

What should the water temperature gauge do when you start the vehicle?

A. Rise immediately

B. Nothing, then rise slowly as the vehicle warms up

C. Nothing

D. None of the above

The temperature gauge will more than likely not move until the vehicle starts to warm up.

16 / 20

You don't have to make both the air and city horns work to get credit for them.

A. False

B. True

You need to make both the air and city horns work to get credit for checking them.

17 / 20

What interior lights do you need to check?

A. Hazard indicators lights

B. Left and right turn indicator lights

C. Instrument panel lights

D. High beam indicator light

E. All the above

You will need to check and make each light indicator work in order to get credit. While you are checking lights, it might not be a bad idea to check the dome light as well.

18 / 20

To test the parking brake you should have the trailer air supply in, trailer hand break released, and the parking brake _____?

A. None of these

B. In

C. Out

D. Released

The parking brake will need to be out or engaged to test the parking brake.

19 / 20

Testing the parking brake requires you to?

A. Move the vehicle slowly and then apply the parking brake stopping the vehicle

B. Pull against the engaged parking brake with no movement

C. Move the vehicle quickly and then apply the parking brake stopping the vehicle

D. Pull against the engaged parking brake with some movement

The vehicle will need to be stopped with parking brake applied, and the trailer air supply pushed in. Put the vehicle in gear and gently pull against the parking brake with no movement.

20 / 20

What should you remember to check while exiting the vehicle?

A. Handrails and steps

B. Condition of the exterior cab

C. Both A and B

D. Fuel tanks and air tanks

Best to make sure you check the handrails, steps, fuel tank, and air tanks at this time.

Utah's CDL Practice Test 2